How can I save electricity: Simple recommendations always work
Each month, pay utility bills, each of us think of how to save electricity.
In the end, an article about the cost is one of the most basic family budgets.Housing and community services are increasing from year to year, so this question is quite suitable.
Use the right lighting products
Where to start saving?Experts recommend replacing standard switches for brightness regulator.Such devices allow you to adjust the light level.
In the end, few people need a continuous light source in the kitchen, in the bedroom, toilet or bathroom.As a rule, there is a relatively small power.
This is especially true for situations when you enter the room for a minute, watch movies or play computer games.
You can continue to save by replacing conventional incandescent bulbs with LEDs.They contribute to much less energy consumption.
For energy -saving lights, although the reality is that they also contribute to reducing electricity costs, not all experts suggest them.
In fact, in their production, manufacturers use mercury.
In addition, such lights give unnatural light, may not affect the vision in the best way and significantly reduce its ability.In addition, their service life is not as reliable as LED lights.
Despite the fact that the back is quite high, they will quickly repay.Using them, you can save when paying.
For example, a 4 W lamp will be 16 times more economical than the standard incandescent lamp of 75 watts.And she will give Sveta exactly the same amount.
Therefore, it is better to spend more money on LEDs than pay more times.
In addition, according to their manufacturing companies, their validity is about 30 thousand hours.At the average of the working process, 4 hours a day, such a light is enough for more than a ten years!
In addition, they are safer than usual fire, because they almost do not heat up.Consider their acquisition is long -term investments and investments and they will pay more.
You can save electricity by increasing the amount of light around the entire circumference of the house.
In this case, it will be easy to adjust the lighting.For example, there is no need to turn on the lights in the entire bedroom or kitchen if you need to light the table.
It is enough to turn on the desktop wall or lamp.
How to use the technique correctly?
The exact choice of electrical equipment and equipment will significantly minimize light costs:
- Remember that in the store, you should choose a technique with "one" of energy consumption.This letter means iron, refrigerator, microwave, etc.In addition, the class is not inferior to him.A big mistake will be the acquisition of devices with the "G" class, because it is the largest energy.
- The size of the device should be selected depending on the number of family members living in the apartment.For example, if the family consists of two people, do not buy a washing machine with 5 kg load.In addition, in this case, you will have to spend more Kilowatt, launching a unit.This also applies to buying a strong, unnecessary refrigerator in a family of two people.
Completely disconnect the electrical equipment if you do not use them for a certain time.Remember that a fork from the outlet must always be turned off after the device!This is due to the fact that the family device consumes electricity even in standby mode.Spend similar operations with chargers for phones, laptops and other devices.
Reasonable use of refrigerators to eliminate unnecessary costs
When choosing a refrigerator in the store, prioritize what does not have the fog.A technique with a similar sign will significantly reduce electricity consumption.
It is best to place the refrigerator in the coldest place in the kitchen.Installing such a equipment factor near the kitchen will be wrong.Should put it outside the room.
It is she who is always older than others.This will allow the refrigerator not to be too hot.
For freezers, it is best to keep it full of products.This supports a certain temperature of electrical engineering is normal.
In addition, make sure the door of the freezer and the refrigerator is always in a closed state.
No need to place hot drinks, soups and other liquids on the shelves of the refrigerator.Leave food on a plate, pot or in a cooling pan.It is free and you do not need to spend, and thereby paying additional money for Kilowatts to be added.Remember that milk, juice, soup and other liquids must always be closed.If not, the moisture will evaporate, this will cause energy consumption.
The kitchen will help save
When buying an apartment, buy one equipped with a gas stove.Preparing food on it has a much higher profit than the product working for electricity.
You can also reduce payment by receipts through the use of induction cookers.
She has the smallest energy consumption, because this family device only heats the bottom of the pan, cauldron or pot.And in normal bricks, the head heated up.
Also, remember that the diameter of the dishes to prepare different dishes should be a bit more than the burner or match it.
This will allow you to get better heat transfer due to the more suitable for the burner.Cooking with a closed lid will help not rotate.
This method will heat food in dishes and air in the kitchen.
Always turn off the heat 5 minutes before the dish is prepared.Cook at high temperatures for initial heating, and then reduce it.
The dishes will achieve ready and not use additional energy costs.
That is the desire to boil water into the gas, because a kettle operates from the network to consume a lot.In addition, when working, it is related to a very high power.
We wash, iron and economical
When choosing a washing mode, remember that most flour contains special ingredients on the basis and removes underwear at low temperatures.
Therefore, it is not necessary to set it up to the maximum.The same rule applies to major revolutions.Also, do not launch a half washing machine.It is better to save linen until completely loaded.
Residual heat can be used when ironing.To do this, 10 minutes before the end of this procedure, turn off the iron.The device will be hot at all times.
Place food leaves on the ironing board.This will not spend electricity to heat its surface.
Other effective methods
The following recommendations will help reduce costs:
- When decorating the room (choosing furniture, wallpapers, floor, ceiling paint and wall), priority for light tones.In the end, the brightness of the color, the more reflected the light.In addition, to get normal lighting level, it will need much less electricity.
- The next recommendation will be trivial, but with its help, you can also significantly reduce the cost of the receipt.To save electricity, you need to wash the window more often (depending on their level of pollution).The fact is that polluted glass always passes nearly half of the sun and natural light.As a result, it is necessary to configure the brightness adjustment set at high capacity.The light bulbs must also be wiped at least 2 times a month.In this case, everything will depend on the level of pollution.
- If you are going to buy a house, consider that the south is the brightest place.This means that on the additional lighting day will not be necessary.
- Before you turn on the system of division or air conditioning, you need to make sure there are no drafts at home.If not, such a technique will heat the street, not room.Choose air conditioning, based on the size of the room.This will pay much less light.To turn on the fireplace as little as possible, you can place the window from plastic.Despite the fact that this joy is not cheap, over the years, it will pay back completely.
An outdated TV or computer screen is the best change for newer (LED, etc.).In the technique of the old style, there is a high level of energy consumption.
Modern technology consumes very little electrical energy.Also do not turn on the scanner, the printer is not necessary.